Payment & Shipping Terms:
|Product Name:||4Pairs UTP Cat5e Outdoor Cable||Conductor:||CCA/BC 0.51mm 24AWG Or Customized|
|Jacket:||PVC/PE/LSZH||Outer Diameter:||5.00mm Or Customized|
|Number Of Conductor:||8||Insulation:||HDPE|
|Color:||Black Or Customized||Package:||Wooden Reel/Pull Box|
Bulk Copper Cat5e Lan Cable,
305m Cat5e Lan Cable,
305m 4 Pair Ethernet Cable
305m Bulk Copper Cable Cat5e Outdoor Network Cable with Power Cord
Precautions for video surveillance equipment installation
Indicator installation: the monitor installation is stable and well ventilated.The display should be installed in a position that protects the screen from direct external light.When light is unavoidable, the screen should be shot.The adjustment knob of the display should be in an easy-to-operate position and a protective cover should be added.
Installation of the console: the entire console should be installed vertically, and the equipment in the cabinet should be positioned and reinforced after the frame positioning.The equipment should be installed firmly and correctly.Each set screw, washer and spring washer shall be firm as required and shall not be omitted.According to the corresponding position of the cabinet and the console, set the cable trough and the air intake hole.The bending radius must be 10 times larger than the diameter of the cable.The console or frame is connected with the plug, the device is reliable, the installation is firm, no deformation and falling off phenomenon.Each end of a cable must have a proper number of labels, as well as maintenance and management labels.The control room of a large security video surveillance system should be equipped with an ESD raised floor.
Camera installation: Before installation, the camera and lens should be adjusted for coarse and focal length after normal operation.After normal operation, the camera and lens should be installed before.Check the horizontal and vertical rotation Angle of the cloud platform, check the fastening of the protective cover and the operation of the wiper, and check the installation dimensions of the cloud platform and support.Do not open the lens cover when moving or setting the camera.The camera and the cradle head should be installed safely and stably.The power supply, video cable and control cable should be fixed, leaving the room should not affect the rotation of the camera.After the installation is complete, a GENERAL Electric test will be performed to check the breeze function, observe the image quality of the monitored area, and repair when conditions are met.
Installation of alarms: Alarms should be installed according to the positions in the construction drawings.If there are obstacles at the installation site or area, the type of detector should be replaced appropriately.If the deviation from the area is large, the design should be improved and the detector should be added.Whether the Bing of the slip detection detector is installed in accordance with the design requirements. If the Angle and direction of the detector are adjusted appropriately in the protection zone, and the adjustment does not meet the design requirements, the design and adjustment mode of the detector should be modified or the detector should be added.
The classification of Cat5 cable is based on the electrical properties of the twisted-pair cable, each of which will represent a different quality level.This type of cable is the main cable purchase option due to its high quality and low price. It contains four copper unshielded twisted pair cables with RJ-45 connectors at the terminal.
Cat5e cable in fact is Cat5e of twisted pair, there are two categories are super five types of non-shielded twisted pair and Cat5e of shielded twisted pair. Cat5e shielded twisted-pair wire has some performance optimization based on the existing Cat5 shielded twisted-pair wire.This type of cable is not recommended if there is no special need for the network.
Contact Person: Mavis