Payment & Shipping Terms:
|Product Name:||4Pairs UTP Cat5e Cable||Conductor:||CCA/BC 0.51mm 24AWG Or Customized|
|Jacket:||PVC/PE/LSZH||Outer Diameter:||5.00mm Or Customized|
|Number Of Conductor:||8||Insulation:||HDPE|
|Color:||Gray/Blue/Orange Or Customized||Package:||Wooden Reel/Pull Box|
1000ft Lan Cable Network Cable,
Cat5e Utp Network Cable 305m,
305m 1000ft Lan Cable
Cat5e Utp Network Cable 305m 1000ft Lan Cable Network Cable 5e
Do you know the four stages of weak current construction?
At the beginning of receiving a weak current engineering project, the weak current new people may be at a loss what to do. In fact, the new project is the best training opportunity for the new people, who can understand the whole life cycle of the weak current engineering project from beginning to end.Before doing a weak current project, we should first know which stages the project is divided into, which is helpful to improve the efficiency of the project, and tease out how to prepare for each stage of construction in advance.
The construction of weak current engineering can be generally divided into four stages: construction preparatory stage, construction stage, commissioning stage and completion acceptance stage.So do you know what to look out for in these four stages?
First, pre-construction preparation:
1. Learn and master the construction specifications of weak current projects;
2. Learned drawings, familiarized with and reviewed drawings;
3. Determine the construction schedule according to the construction period;
4, technical disclosure, clear characteristics of the construction task;
5, good construction budget and organizational design.
Second, construction phase:
During the whole construction process, we should carry out every inspection in strict accordance with the quality inspection and evaluation standards of the project.Upon completion of the project, the construction quality needs to be inspected and evaluated and materials prepared to ensure that the project is delivered in accordance with the design requirements and meets the customer's functional requirements.
Third, commissioning phase:
In this phase, the debugging of a single device or component is usually carried out first, and the debugging of the whole system is finally carried out.The specific debugging depends on the actual situation of the system.
Fourth, the completion acceptance stage: this stage is the last step, but also the most important step.
1, the weak current engineering project acceptance, here should pay attention to three steps: concealed engineering acceptance, project acceptance and completion of the project acceptance;
2. Completion acceptance documents shall be submitted in categories, and all completion technical documents shall be installed according to specifications.
The above is the relevant content of several stages of weak current engineering construction that should be paid attention to. I hope it will be helpful to you
1Box CAT5E UTP Cable 100m/200m/305m
100m/200m/300m per roll, PE film, or easy pull out box, or wooden reel.
We can also make it according to customer's requirement.
Contact Person: Mavis