Payment & Shipping Terms:
|Product Name:||4Pairs UTP Cat5e Cable||Conductor:||CCA/BC 0.51mm 24AWG Or Customized|
|Jacket:||PVC/PE/LSZH||Outer Diameter:||5.00mm Or Customized|
|Number Of Conductor:||8||Insulation:||HDPE|
|Color:||Gray/Blue/Orange Or Customized||Package:||Wooden Reel/Pull Box|
8 Core Cat5e Lan Cable,
Copper UTP Cat5e Lan Cable,
Copper Network Cable
Communication Cable Wholesale Utp Cat5e Cable Manufactures Copper Network Cable
What are the steps of network cabinet arrangement?
1.Install the cabinet: Install the cabinet in the correct way. You can watch some installation videos for operation.
2. Line arrangement: In the construction of the network room, the first task of this step is to group the network cables, and then bundle all the power cables in the equipment together, and then put the power plug through the through hole at the back, and arrange the equipment through the separate wire frame.
3. Securing the device: After placing the device on the cabinet, the baffle plate in the cabinet should be adjusted to an appropriate position for future arrangement.
4. Label: After connecting the network cables in the cabinet, label the network cables.The crossed network cables can be labeled with different colors. The devices need to be classified, numbered, and labeled to facilitate later arrangement.
After completing the above steps, you need to finish the work and make sure there are no problems.A network connection test is required to ensure that the network is connected.Another point is to update the cabinet collation content document for maintenance and inspection.
Twisted pair in computer LAN can be divided into two categories: unshielded twisted pair (UTP) and shielded twisted pair (STP). The STP is wrapped by a metal material to reduce radiation and prevent information from being eavesdropped. It also has a high data transmission rate, but it is expensive and complicated to install.UTP does not have metal shielding material, only one layer of insulating rubber wrap, the price is relatively cheap, flexible network.In addition to some special occasions (such as the electromagnetic radiation is serious, the transmission quality requirements are higher) in the wiring use of STP, we generally use UTP.
UTP in use today can be classified into 3, 4, 5, 5e, 6, and 6A.Among them, three types of UTPs adapt to the requirements of Ethernet (10Mbps) for the transmission medium, which is an important transmission medium in the early network;Because the standard of UTP 4 is introduced later than that of UTP 3, and the transmission performance is not much better than that of UTP 3, so it is seldom used.The five UTPs are the preferred media for fast Ethernet (100Mbps) due to their low price and high quality.The super five UTPs are used for gigabit Ethernet (1000Mbps).
Cat5e has low attenuation, less crosstalk, higher attenuation to crosstalk ratio (ACR) and signal to noise ratio (Structural Return Loss), smaller delay error, and greatly improved performance.The maximum transmission rate of Cat5e cable is 250Mbps.
Why Choose Soger?
|1||Innovative and complete solution provider.|
|2||Professional and timely technical support.|
|3||Comprehensive certificate authentication.|
|4||Strict testing and packing section.|
|6||OEM/ODM production service.|
|7||Perfect after-sales service.|
1 year warranty period after sales(except man-made,natural disaster,special environmental corrosion).
Contact Person: Mavis