The copper cabling system is suitable for the occasions with high configuration standards in the office integrated cabling system, using optical cables and copper core twisted-pair cables to form a hybrid network. The configuration of the integrated office cabling system should be based on the basic and enhanced office cabling system to add fiber optic cable systems.
It is suitable for the occasions with higher configuration standards in the office integrated wiring system, and uses optical cables and copper core twisted-pair cables to form a network. The configuration of the integrated office cabling system should be based on the basic and enhanced office cabling system to add fiber optic cable systems. The rationality of the design of the office’s integrated wiring system directly affects the standard implementation of the entire system. The number and location of information points, the routing of strong and weak current lines, and subsequent maintenance should be planned in advance to ensure the office’s integrated wiring system. It is durable and practical.
Specifications for copper cabling
The copper cable used for water wiring should not exceed 90m; when choosing the length of the wiring cable, be sure to pay attention to the cable is not the straight line distance from the distribution frame to the wall socket panel, but the full routing distance along the pipeline.
T568-A and T568-B, there is no substantial difference between the two, only the difference in color. These two specifications cannot be mutually used in a copper cabling system, and a copper cabling system software can only select one network cable connection specification.
3,Elements to be considered before copper cabling
Before deploying copper cables, we must first carry out overall planning, such as where there must be how many copper cables, whether wire ducts or conduits must be used for copper cable wiring, and whether copper cables will cause serious environmental pollution at high temperatures or organic chemicals These are destroyed in the natural environment, so pay attention to maintaining copper cables when deploying.
Attention should be paid to the construction.
1,Unless it is necessary, do not remove the twisted structure of the Category 5 twisted pair in the copper cable at any time
2,The cable is not long enough not to overlap like normal power wires
3,Application compatible with copper cable RJ45 connector, copper cable distribution frame and wall socket panel, etc.
4,If the copper cable is damaged, there is no need to try to repair it according to the patchwork method, and the new copper cable should be replaced immediately
5,When connecting the RJ45 network cable crystal plugs on both sides of the copper cable, only a small part of the outer sheath on both sides of the copper cable needs to be removed (generally no more than 3 inches)
Integrated wiring products
Contact Person: Miss. Sherling Xie