CCA Cat5e UTP Ethernet Cable RoHS Cat5e Outdoor Waterproof Ethernet Cable

Outdoor Cat5e Network Cable Utp Cat Ethernet Cable Cca Cable  Outdoor Lan Cable

What should I pay attention to when installing a weak current cabinet?

Cabinet is used to hold or electrical or electronic device independent since the support of the chassis, the cabinet door general configuration, removable or not detachable side board and the backboard, cabinet is an integral part of the electric equipment, is the carrier of electrical control equipment, can provide the storage equipment of waterproof, dustproof, preventing electromagnetic interference shielding effect.

And there are a lot of weak current cabinets, servers, distribution frames, routers and other equipment in the machine room, these devices are closely connected, indispensable.Therefore, what should I pay attention to when installing the weak current cabinet in the equipment room?

1. The cable length of the wiring subsystem should be controlled within 90 meters.

2. Set up an independent IT special weak current room as far as possible.

3, choose the floor type cabinet, and in the four sides of the cabinet with equipment installation and maintenance space.

4. There should be no abnormal smell around the weak current room/wiring cabinet to avoid equipment damage or difficult operation for maintenance personnel.

5. When the weak current room is shared with other departments, try to isolate the space around the weak current cabinet, so that the space can be used independently by IT.

6, for the weak electric room or public area that cannot be locked, should be checked frequently.If the cabinet is damaged or leaking, or the cables or devices are buried with information or products of other departments, discuss with the department that shares the cabinet and clean it up as soon as possible to avoid unnecessary troubles caused by future maintenance.

7. When the cabinet needs to be installed in the public area or borrowed from other parts of the space, the strength of the cabinet should be strengthened, the holes outside the cabinet should be closed (waterproof), the glass door should not be used as far as possible (to prevent accidental injury), and the special lock/key should be used to ensure the uninterrupted power supply of the cabinet.In a word, the wiring system and network equipment in the cabinet should not stop working due to external reasons, resulting in the interruption of information transmission within the jurisdiction.

The above is the installation position of the weak current cabinet matters needing attention

Description:                                                                                         

Cat 5/ Cat5e network cable is also called CAT5 / CAT5E network jumper, in which category 5 network cable can be divided into shielded (STP) twisted pair and unshielded (UTP) twisted pair.Five kinds of cable transmission frequency is 100 MHZ, is the most commonly used in the past an Ethernet cable, but due to now exceed 5 kinds of Internet technology mature, though with 5 kinds of cable transmission frequency is 100 MHZ, but on the transmission rate, in excess of the five types of cables ten times higher than that of five types of cables, in performance, super five types of cables near end crosstalk crosstalk and attenuation ratio, return loss and other parameters are improved, and the price, both are equal, so now five kinds of cable has gradually withdraw from the market.

Specification: