Payment & Shipping Terms:
|Product Name:||4Pairs UTP Cat6 Cable||Conductor:||CCA/BC 0.57mm 23AWG Or Customized|
|Jacket:||PVC/PE/LSZH||Outer Diameter:||6.00mm Or Customized|
|Length:||305m 1000ft Or Customized||Type:||UTP|
|Number Of Conductor:||8||Insulation:||HDPE|
|Color:||Gray/Blue/Orange Or Customized||Package:||Wooden Reel/Pull Box|
305m Cat6 Ethernet Lan Cable,
1000Mbps Cat6 Ethernet Lan Cable,
4Pairs UTP Cat6 Lan Cable
1000Mbps 0.56mm Solid CCA UTP Cat6 Ethernet Lan Cable 305m Indoor
Whether network cable is required for installation monitoring?
1. Small household monitoring: wireless connection is generally adopted. The biggest advantage is that the installation and commissioning are simple, the cumbersome construction wiring can be avoided, and it is very beautiful! The premise of adopting this method is that the WiFi signal strength in the LAN in the installation area must be better. The disadvantage of this method is poor stability, and it is easy to cause screen disconnection, jamming, delay and instability, which increases the later maintenance cost
2. Monitoring of large factories or schools: generally, wired connection is used, and this connection is not only network cable, because the transmission distance of network cable is generally about 100m. If it exceeds 100m, signal attenuation and distortion will occur, resulting in signal and instability. At this time, optical fiber transmission and Bridge transmission will be used, and optical fiber will be used for long-distance transmission, The optical signal is converted into network signal through optical fiber transceiver. The network cable is used for close distance, and the switch is used to connect to the camera! The biggest advantage of this method is that the monitoring picture is stable, high definition, convenient for batch management and less maintenance in the later stage. The disadvantage is that the construction layout is difficult and the early construction cycle is long.
3. Ultra long distance monitoring: GPRS traffic transmission is generally used for this monitoring. This method can be used where ultra long distance transmission and construction wiring are very difficult. Generally, this method can be used for temporary use of cameras at some high-speed intersections. The installation is simple, the signal is stable, and the later maintenance and commissioning is also easy.
|Application||Home/Small Office/etc.||Home/Small Office/etc.||Project/high-speed transmission/etc||Project/high-speed transmission/etc.|
Contact Person: Mavis